Skip to content
Eastledge Interiors

Guides

How to identify your ceiling tile

A replacement box only matches if the size, edge and grid agree. Here is what to look at before you order.

Published 22 November 2026

Suspended mineral fibre ceiling tile and grid detail

A replacement ceiling tile has to match the opening it drops into and the edge the grid was built for. Measuring the face of the tile is the first check. Looking at how it meets the metal grid is the second.

Size

Most commercial mineral fibre and plasterboard tiles in the UK are made for a 600x600mm module or a 1200x600mm module. The tile itself is a little smaller than the module so it can sit in the grid. If you measure the visible face, you are usually looking at one of those two modules.

The Eastledge shop lists both sizes. Examples include Knauf Danotile 600x600 and Knauf Danotile 1200x600.

Edge

Look at the side of a tile that has been taken down, or at the shadow line where the tile meets the grid.

A square edge tile sits on top of the grid. The face of the tile and the face of the grid are close to level.

A tegular edge steps down, so the grid face sits in a rebate and the tile face is below the grid.

A microlook edge is a finer version of that rebate, used with a narrower grid.

If the edge does not match, the tile will not sit properly even when the module size is right. The shop filters by edge, and each product page states the edge in the name. Rockfon Artic square edge 600x600mm and Rockfon Artic tegular edge 600x600mm are the same range with different edges.

Grid and the back of the tile

The visible face of the metal tee is either the wider 24mm grid or the narrower 15mm grid. The tile edge has to suit that tee. A short explanation of the two grids is in 15mm vs 24mm ceiling grid and tile edges explained.

Turn a spare tile over. Some tiles have a product name printed on the back. If a name is there, use it. If it is not, size, edge, surface and grid are still enough to choose a box from the ceiling tile shop.

Surface

A smooth foil face, such as Danotile, is wipeable and is often used in kitchens and food rooms. A fissured or textured mineral face, such as Rockfon Artic or Ecophon Advantage, is the more common commercial ceiling. Do not assume two white tiles are the same because the colour looks close. Order enough from one batch when a close match matters.

We supply and fit these tiles. You can collect from Alvaston, Derby, or arrange pallet delivery. Our team can also install them. If you are unsure of the edge, send a photo of a tile out of the grid and we will help you match it.