Skip to content
Eastledge Interiors

Services

Commercial ceiling contractors for the East Midlands

Eastledge is a commercial interiors contractor based at 36 Curzon Lane, Alvaston, Derby, and has traded from that yard since 1986. The work is ceilings, partitions and fit-out for commercial buildings: offices, education, healthcare, retail, leisure and industrial welfare. Every package on this page is for a commercial building.

Seventeen specialist disciplines sit under one contract. Operatives are part of the Eastledge team, programmed into the principal contractor's master schedule before work starts. Main contractors with repeat relationships include GF Tomlinson and Kingfisher Construction. Direct commercial clients instruct the same trades on smaller packages, where Eastledge can act as principal contractor under CDM 2015.

The city hubs for this region are commercial interiors in Derby, commercial interiors in Nottingham and commercial interiors in Leicester. Sector pages are listed under building type.

Ceilings and acoustics

5 services

Suspended Ceilings

Modular grid and tile, MF plasterboard, metal plank and tile, and timber feature ceilings for commercial buildings. Current specifications use Rockfon, Ecophon, SAS International, Hunter Douglas and Knauf Ceiling Solutions. A legacy Zentia specification is reviewed for substitution: Zentia Limited entered administration on 8 June 2026 and production ceased.

Acoustic Panelling

Wall-mounted absorption where the ceiling alone does not control reverberation. Published examples include fabric-wrapped panels at the University of Nottingham Amenities Building and acoustic wall panelling at Ravenshead Leisure Centre and Redmoor Academy.

Acoustic Rafts & Baffles

Free-hanging rafts and baffles for exposed soffits and open plenums. Completed packages include TVS Acoustics baffles at the University of Nottingham Clinical Training Centre and Ecophon Solo baffles in the Glenair factory in Mansfield.

Timber Ceilings

Linear, slatted and panelled timber, including Hunter Douglas solid-wood systems at the British Geological Survey James Hutton Building in Keyworth and timber feature ceilings at the University of Nottingham Clinical Training Centre. Décor Acoustics is the principal timber partner where the specification is open to a recommendation.

Metal Ceilings

Perforated and plain metal plank and tile for lobbies, retail, leisure and Cat A offices. Pioneer Park Dock in Leicester used a perforated metal plank with acoustic backing across a landlord floorplate.

Walls and partitions

7 services

Dry Lining

Metal stud partitions, wall linings and MF ceilings, set out to the consultant's specification or a measured take-off. Board systems with manufacturer pages on this site include British Gypsum, Knauf and Siniat.

Partitions

Solid metal stud partitions for offices, education and healthcare, including the opaque sections that connect to glazed screens. Charlotte House in Derby is the published office example, completed in September 2026.

Glazed Partitions

Aluminium-framed single and double glazed screens, framed doors and corner returns for offices and meeting rooms. At Charlotte House the screens are full height, with black perimeter framing and a continuous privacy band.

Acoustic Partitions

Stud assemblies specified for a higher acoustic rating than a standard office partition, typically meeting rooms, healthcare and education rooms where speech privacy is part of the drawing.

Demountable Partitions

Proprietary modular systems for floorplates that need to be reconfigured with less waste than a traditional stud wall. Used where a landlord or occupier expects the layout to change between tenancies.

Fire-Rated Partitions

Tested compartment walls from EI 30 to EI 120 for escape routes and riser enclosures, built to the manufacturer's tested construction rather than a site-made variant.

Shaft Walls

Asymmetric fire-rated linings for lift shafts, service risers and stair enclosures, installed from one side where the shaft is already closed.

Dry lining finishes

1 service

Taping & Jointing

Level 4 and Level 5 jointing on plasterboard, producing the substrate the decoration trade follows. It closes out dry lining on fit-out, education and retail packages, including the CO-OP store programme.

Specialist cladding

2 services

Hygienic Cladding

PVC hygienic wall cladding for healthcare, food production and clinical rooms. Manufacturer pages on this site cover Altro, Kleenclad, AM-Clad and Beplas.

Ceramic Tiling

Ceramic and porcelain to commercial kitchens, washrooms, wet areas and feature walls. The Clinical Training Centre at the University of Nottingham included tiling to washrooms and wet areas in the healthcare training rooms.

Fit-out

2 services

Commercial Fit-Out

Cat A landlord handover and Cat B occupier fit-out under one contract, sequencing ceilings, partitions, dry lining and finishes with the principal contractor. On smaller trade-scope work Eastledge can act as principal contractor and hold the CDM 2015 duties.

Shop Fit-Out

Retail, hospitality and leisure interiors to a brand standard, including convenience rollouts delivered around trading hours. The CO-OP programme covered suspended ceilings, partitions, taping and jointing and, at the University of Leicester store, dry lining.

Systems and manufacturers we install

System choice follows the acoustic, fire, hygiene and appearance requirements on the drawings. The manufacturers below are the ones with pages on this site.

Current suspended ceiling specifications use Rockfon, Ecophon, SAS International, Hunter Douglas and Knauf Ceiling Solutions. Acoustic panels, rafts and wood wool include Troldtekt, Décor Acoustics and TVS Acoustics. Plasterboard systems include British Gypsum, Knauf and Siniat. Hygienic wall cladding pages cover Altro, Kleenclad, AM-Clad and Beplas.

Zentia appears on completed projects, including Glenair in Mansfield and historical tiles at Nottingham Trent University Clifton Campus. Zentia Limited and Zentia Profiles entered administration on 8 June 2026 and production ceased. A live specification that still names Zentia needs a documented substitution before it is ordered.

Sectors

The same trades are specified differently by building type. Published sector pages cover the commercial markets this contractor works in.

  • Education

    Universities, colleges and schools, including the University of Nottingham campus packages.

  • Offices

    Cat A landlord floors and Cat B occupier partitions, including Pioneer Park Dock and Charlotte House.

  • Healthcare

    Clinical and hygienic interiors. The Clinical Training Centre is a healthcare training building at University Park.

  • Retail

    Brand rollouts and convenience refits, including the CO-OP programme across five stores.

  • Leisure

    Sports and wet leisure acoustics, including Ravenshead Leisure Centre.

  • Industrial

    Office and welfare space inside factories, including Glenair in Mansfield.

How we work with main contractors and direct clients

The route is the same whether the instruction comes from a main contractor or from the commercial client. What changes is who holds the building contract.

  1. Enquiry. Send drawings, a brief or a programme through the quote form. A measured take-off is priced where the consultant specification is not already written.
  2. Survey. Pre-construction checks cover existing conditions, services routing, asbestos status and access, including out-of-hours rules on occupied retail, education and healthcare sites.
  3. Design. Where the drawings name a tested system, that system is installed. Where the specification is open, the ceiling or partition is selected from the manufacturers listed above against the acoustic, fire and hygiene requirement.
  4. Programme. Trades are written into the principal contractor's master schedule. Weekly programme returns go to the project manager. On a direct instruction, the same sequence is held against the client's handover date.
  5. Install. On a Cat B office the usual order is services first-fix, dry lining and partitions, suspended ceilings, services second-fix, taping and jointing, then specialist finishes. Trades that would clash are sequenced apart.
  6. Handover. Snag walks against the specification, an O&M pack for the products installed, manufacturer warranty registration where it applies, and a return during the defects period. Where a principal contractor leads handover, the trade documents go into their pack.

Projects in and around the East Midlands

These are published project records for Derby, Nottingham, Leicester and the nearby towns. Each link goes to the case study already on the site.

FAQs

Questions about commercial interiors

Get in touch

Have a project in mind? Let's talk.

Tell us a little about the building, the programme and your priorities. We'll come back with a clear next step, fast.